Air Cleaners

PureAir® Air Purification System
The PureAir™ air purification system helps to significantly reduce levels of airborne volatile organic compounds, cooking odors, and common household odors. airborne dust particles and mold spores, and pollen in residential spaces. The PureAir™ air purification system includes a MERV 9 Pleated Filter, UVA lamps, and a Metal Insert that is coated with a titanium dioxide catalyst. As air enters the system, a percentage of airborne particles and bioaerosols, such as mold and bacteria, larger than .3 microns are captured by the pleated filter. The smaller airborne particles, odors, and chemicals continue through the system. The UVA lamp activates the catalyst on the Metal Insert. The catalyst combines with water vapor in the air to form hydroxyl radicals that destroy a percentage of the remaining odors and chemicals.

Features

• Industry-exclusive air purification technology
• Only single indoor air quality system to attack all three classes of indoor air contaminants:
  • Small, breathable particles such as dust, dirt, pollen and allergens
  • Airborne mold spores, bacteria and viruses
  • Odors and chemical vapors
• MERV 16* PrecisionPleat™ media filter
• Removes OVER 95% of particles ranging in size down to 0.3 micron**
• Removes OVER 90% of bioaerosols ranging in size down to 0.01 micron**
• Removes and destroys approximately 50% of household odors and chemical vapors in a 24-hour period***
• Hospital inpatient care/general surgery level filtration
• Whole-home purification works with your existing heating and cooling system
• Reduces and destroys ozone—a product of pollution and a known lung irritant****
• 5-Year Limited Warranty on covered components

HEPA 600HS Home Air Purifiers and Cleaners

Partial By-Pass Configuration or Stand Alone “L” and “S” Versions

The 600HS unit was designed to be used either attached to any forced air ducted heating/cooling system in the partial by-pass configuration or used as a stand alone unit. For attachment to a ducted heating/cooling system typically the “L” version of the 600HS unit is used. The “S” unit, or straight through unit, can also be used for attachment to HVAC units when the “L” version is not suitable. Either the “L” or “S” versions can be used as stand-alone systems when not using an HVAC unit. The “L” or vertical housing allows for left or right hand installation and the “S” or horizontal unit allows for ceiling mount or attic installations. In both cases the top and bottom sections are separate and can be rotated for best inlet/discharge orientation.

Controller for the 600HS and 600HS Plus Series Units HVAC and VCU Controllers

If the 600HS unit is used attached to an HVAC unit either a sail switch or pressure switch can be used to operate the 600HS in conjunction with the heating/cooling thermostat. For all other applications the on/off switch can be used. Pure Air Systems offers two different controller options for the PLUS series. Couple the ECM motor with our HVAC controller and the system fan will modulate (speed up and ramp down) in conjunction with most heating/cooling systems. For applications where more flexibility in HEPA filtered air volume control is required or you want to run the system independently you can use the VCU controller. The digital VCU controller allows for air flow speed control from 1 to 100% of volume in 1% increments.